Aluminum Plate

Chemical composition
Magnesium Mg: 0.05;
Zinc Zn: 0.05;
Manganese Mn: 0.05;
Titanium Ti: 0.03;
Vanadium V: 0.05;
Iron: 0.40;
Single: 0.03

7075 Aluminium Sheets are thin and flat shaped sheets of 7075 aluminum alloy.
7075 Aluminium Sheets are one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent.
7075 Aluminium Sheets are very suitable for high stress aircraft components.

2A12 aluminum plate is a kind of high strength duralumin, which can be strengthened by heat treatment. It has medium plasticity under annealing, hardening and hot state, good weldability in spot welding, and tends to form intergranular cracks when using gas welding and argon arc welding. The machinability of the alloy is good after quenching and cold hardening, but bad when annealed..

3003 aluminum sheet formability, solubility, corrosion resistance are good. For processing parts that need to have good formability, high corrosion resistance and good weldability, or require these properties and need to have higher strength than 1XXX series alloy, such as kitchenware, food and chemical products processing and storage devices, tanks and tanks for transporting liquid products, All kinds of pressure vessels and pipe general utensils, heat sinks, cosmetic plates, copier rollers, Marine materials processed with thin sheets.

Find a variety of aluminum foil rolls with variable strengths and sizes at wholesale prices! Find aluminum foil for professional or home use.

5052 Aluminum Plate is a thin, flat shaped sheet of 5052 aluminum alloy.
5052 Aluminum Plate's fatigue strength is higher than most aluminum alloys.
It has particularly good resistance to marine atmosphere and salt water corrosion.
Having excellent workability, 5052 Aluminum Plate may be drawn or formed into intricate shapes. When annealed, it has slightly greater strength which minimizes tearing that can occur in 1100 or 3003 grades.
5052 Aluminum Plate has excellent finishing characteristics with bright, clear anodic coatings.

5083 Aluminum Sheets, is one of the most widely used rust-proof aluminum, this alloy has high strength, especially fatigue strength: high plasticity and corrosion resistance, can not be heat-treated to strengthen, plasticity is still good when semi-cold work hardening, low plasticity when cold work hardening, good corrosion resistance, good weldability, poor machinability and polishability. 5083 aluminum plate is mainly used for the requirement of high plasticity and good weldability, low load parts working in liquid or gas medium, such as oil tanks, gasoline or lubricating oil conduits, various liquid containers and other small load parts made by deep drawing: wire is used to make rivets.

Anodized Aluminum Plate oxidation, the formation of thin layers of aluminum oxide on the surface , its thickness is 5 ~ 20 microns , hard anodized film up to 60 ~ 200 microns . After anodizing the aluminum plate, improve Anodized Aluminum Plate's hardness and wear resistance, up to 250 ~ 500 kg / mm2, good heat resistance, hard anodized film melting point up to 2320K, excellent insulation, breakdown voltage up to 2000V, enhanced corrosion resistance, in ω = 0.03 NaCl salt spray by several thousand hours without corrosion. The thin layer of oxide film has a large number of microporous, can adsorb various lubricants, suitable for the manufacture of engine cylinders or other wear-resistant parts; film microporous adsorption capacity can be colored into a variety of beautiful and bright colors. All the non-ferrous metals or their alloys (such as aluminum, magnesium and their alloys, etc.) can be anodized.

Chequer Aluminum Plate can be divided into five rib aluminum, compass aluminum, orange peel aluminum, lentil pattern aluminum, spherical pattern aluminum, diamond aluminum and other pattern aluminum.

8011 is a series of aluminum plates, belonging to the 8××× series of alloy aluminum plates, is the addition of Al-Fe-Si elements, more than 1% of the total alloying elements of its alloy properties have a higher advantage. 8011 is commonly used to make aluminum foil, its performance is better than pure aluminum foil, and it is widely used in aluminum foil, and aluminum sheet is not commonly used.